Skip to content

Percent Change & Percent Error Calculator

Percent change tells you how much a value grew or shrank compared with where it started. Percent error tells you how far a measurement is from the true value. Enter two numbers to get either one with the full working.

How to use the percent change & percent error calculator

  1. Choose percent change or percent error.
  2. Enter the old (or measured) value and the new (or true) value.
  3. Read the percentage and the steps.

Examples

80 → 100

Answer: 25% increase

50 → 40

Answer: 20% decrease

measured 9.5, true 10

Answer: 5% error

Percent change

Percent change compares a new value with an old one:

A positive result is an increase and a negative result is a decrease. The calculator also finds percent error and percent difference, and shows which formula it used.

Worked example: increase and decrease

  • Rent goes from $1,200 to $1,320: .
  • A stock falls from $80 to $62: .

Percent error (science and lab work)

You measure m/s² and the accepted value is : .

Percent difference (two measurements, neither is "true")

For 48 and 52: .

Changes don't simply add

Up 50% and then down 50% does not get you back to the start: , which is a 25% loss overall. Combine successive changes by multiplying the factors: .

To undo a 25% increase you need a 20% decrease, because .

Common mistakes

  • Dividing by the new value instead of the old one.
  • Percent vs percentage points: an interest rate rising from 2% to 3% is 1 percentage point, but a 50% increase.
  • Reverse problems: if a price after a 30% rise is $91, the original is , so $70, not .

Percent change is used for prices and inflation, salary rises, population growth, test score improvements, and comparing results in experiments.

In real life: inflation and salaries

Your salary rises from $48,000 to $50,400, while prices rise 4% over the same year.

  • Salary change: .
  • Real (inflation-adjusted) change: .

Although you earn 5% more, your buying power grew by less than 1%. Subtracting () gives a close estimate, but dividing the multipliers is exact.

Scientists use percent error the same way. If a lab measures the boiling point of water as 98.6°C, the error is , which could point to the lab's altitude or a thermometer that needs calibrating.

Practice problems

Try each one first, then open the answer to check your work.

  1. 1.From 40 to 50: what is the percent change?

    Show answer

    +25%.

  2. 2.From 250 to 200: what is the percent change?

    Show answer

    −20%.

  3. 3.The measured value is 4.8 and the true value is 5. What's the percent error?

    Show answer

    4%.

  4. 4.What is the percent difference between 30 and 34?

    Show answer

    12.5%. .

  5. 5.A shirt costs 36 after a 10% rise. What was the original price?

    Show answer

    32.73 (to 2 d.p.). .

Key terms

Percent change
The change relative to the original value, as a percentage.
Percent error
How far a measurement is from the accepted value, as a percentage.
Percent difference
The difference between two values relative to their average.
Absolute change
The plain difference, new minus old.
Multiplier
, used to apply or combine changes.

Frequently asked questions

What is the percent change formula?

Percent change = (new − old) ÷ |old| × 100. A positive result is an increase and a negative result is a decrease.

What is the percent error formula?

Percent error = |measured − true| ÷ |true| × 100.

Is percent change the same as percentage points?

No. Going from 10% to 15% is a 5 percentage-point rise but a 50% percent change.

Can percent change be more than 100%?

Yes. Going from 20 to 50 is a 150% increase. A decrease can't go below −100%, which would mean dropping to zero.

Why is percent error always positive?

It uses the absolute value, because it measures how far off you were, not in which direction. Some science classes keep the sign to show over- or underestimates.

When should I use percent difference instead of percent change?

When neither value is the 'original' or the 'true' value, such as comparing two measurements or two brands.

How do I combine several percent changes?

Multiply their multipliers. A rise of 10% then 20% is , which is a 32% rise overall.